Latest Jobs in Nigeria

WorleyParsons Jobs in Nigeria for Structural Lead & Completions Engineer

WorleyParsons Jobs in Nigeria for Structural Lead & Completions Engineer  WorleyParsons has had a presence in Africa since the 1970’s when Parsons E&C established their offices in Cairo, Egypt. Since that time the company has continued to spread across the continent and in 2003 a joint 
venture was established in Lagos, Nigeria to form DeltaAfrik Engineering Ltd. Over the past five years, WorleyParsons has executed more than 100 projects in over 15 countries. In 2003 a joint venture was established in Lagos, Nigeria to form DeltaAfrik Engineering Ltd. WorleyParsons has the skills and technologies to address all challenges, from small brownfield services contracts to mega greenfield projects. Their service capability covers the entire asset lifecycle: from identifying the opportunity to the operating phase.

WorleyParsons' extensive experience ensures that they provide project solutions with the lowest total lifecycle cost while meeting each customer’s specific requirements. Their services go beyond new developments, to supporting operating assets through delivering brownfield projects which maintain asset integrity and improve business performance. By treating asset services as a specific business stream, WorleyParsons provides systems and work processes to deliver these projects effectively.

The following job vacancies exist:

Job Title: Structural Lead 
Req. No. : 25842
Job Description
    Directly responsible for output, may be shared with other Designers, depending on project
    To ensure Health, Safety and Environment has the highest priority in all activities undertaken by Engineering and Design personnel.
    To provide all necessary input to the project control and reporting system, including attending review meetings, maintaining the progress report for the discipline, liaising with the project planning engineer for discipline progress planning , and preparing the discipline section of the monthly report
    To prepare the discipline project design criteria prior to the commencement of any engineering or design activities
    To design the discipline design group by close liaison witn the discipline lead designer or design coordinator in order to develop practical and economic designs to achieve the project objectives
    To arrange for the preparation of all discipline design deliverables including layout drawings, detail drawings, schedules, specifications, datasheets, calculations requisitions and technical tender evaluations in accordance with the project requirements and the company procedures and standards
    To liaise with other design groups, and to coordinate the discipline activities with other groups to achieve the overall project design objectives in the most efficient manner
    To provide discipline input to the project key documentation during squad checking, or by the issue key documentation change requests immediately the discipline activities create or identify the need for a change to those documents
    To foster a culture of continuous improvement 
    To supervise the work of the discipline engineers and designer.
    To allocate engineering resources in order to complete all deliverable for the discipline within the allocated staff hour budget and schedule
    To specify and select appropriate equipment to allow the project to develop a practical and economic design
    To ensure technical integrity of design deliverable for the discipline
    To ensure that all document checking and design verification tasks have been completed in accordance with the company and project procedures before formal document issue
    To review and approve the design documentation prepared by the discipline
    To ensure conformance with customer requirement

Job Requirements

    Bachelor degree in Engineering (or related field) and 20+ years of related work experience, including supervisory/managerial experience within a large Engineering firm is required.
    Professional registration with active membership in a professional society is also required.
    Proficiency in utilizing specific computer software to complete engineering assignments.
    Authority / Freedom To Act / Decision Making (Incl Budgetary Responsibility)
    Works under general supervision of Engineering
    Manager Makes informed decisions when appropriate
    Work requires an understanding of company policies and procedures
    Work follows applicable codes and standards, design practices and design quality standards
    Proven capability for managing a large number of personnel and/or complex technical situations is required, as well as familiarity with industry practices and current technology. 
    Requires communication skills to be able to successfully work in a team environment and communicate effectively with other disciplines.
    Works to a given schedule
    With budgetary responsibility
    Other Relevant Information
    Unlimited travel required
    Work require liaising with other disciplines to develop design


Deadline: 18th September, 2012

Click here to APPLY 


Job Title: Completions Engineer
Req. No: 25948
Job Type: Full-time
Advertising Category: Construction/Completions
Location of Job: Lagos, Eket

Job Description
    His/Her activities will be to act as the DA/Client representative (Completions) whether in the main office or at site.
    He/She will be responsible for verifying all Systems Completions requirements associated with the work scope of project activities for all disciplines, i.e, Structural, Piping, Electrical, Mechanical, Process and Instrumentation prior to issue to Mechanical Completion (MC) and will be the Systems Completions signatory from Construction to Commissioning and the acceptance of a system or sub system via the MC certificate.
    After receipt of the MC certificate the Completions Engineer along with the Commissioning Engineer will plan the Dynamic Testing activities and carry out live testing on the equipment or systems handed over from Construction. For a particular piece of equipment or system a Completions and Commissioning Procedure will have been created by the Completions and or the Commissioning Engineer (or Third Party) and it will be followed with each activity signed for as it is tested to Vendor Lloyds and/or our client satisfaction.
    Each activity which is complete will be identified on a RFSU or Ready for Start Up document. Each RFSU will contain a Sub system or system or multiples of the same and all these documents together will add up to the system handover document.
    This will in effect allow the system to be handed over to the client via a single sheet known as a System Handover certificate.
    The Systems Completions and Commissioning Engineer is responsible for ensuring that the tests are robust enough to satisfy any statutory body and that they are fit for purpose. He/She will be actively involved in all testing and handing over to the operating company a vessel fit for purpose.
    He/She is responsible for ensuring that all Certification, Completions, Commissioning and Handover Dossiers are complete and able to demonstrate the Technical Integrity of construction through to mechanical completion, pre-commissioning, commissioning & handover, including any vendor work scope documentation ensuring that all Client or vendors requirements have been met.
    His/Her duties for Systems Completion and Close-out include:
    The signing of the Construction, Completion, Commissioning and Hand over Dossiers.
    The creation and administration of the Punch list Register. Ensuring Punch list items where applicable are closed out.
    All appropriate documentation TQ’s/EQ’s, Tool Box Talks is included in the pack.
    All affected equipment tags / cables / line numbers have been updated.
    Appropriate drawings have been as-built. Red Line mark ups are available.
    Final sign off and Closeout Dossier signed for delivery to Client.
    Deputise for Senior Commissioning Engineer when required.The above outlines some of the duties of the Commissioning Engineer but is not limited to the items in the list.
    Signing and verifying all certification present and correct.
    Advising and ensuring that they are delivered where and when they should be as per the project plan.
    The creation and administration of the TQ Technical Querie/EQ Engineering Queries register. Any deviations to the original work scope documented and TQ’s/EQ’s are present where applicable and are closed out.


Responsibilities

    Ensure from start of project that all Engineering drawing system numbers are in line with the clients systems
    Planning and coordination of all static and dynamic commissioning in the project
    Overseeing subcontractor commissioning works
    Coordination of material and equipment requirements with planned commissioning schedules
    Coordination of turnover activities and start-up support
    Coordination of work efforts between various subcontractors and client specialist dedicated to commissioning and start-up activities
    Coordination of vendor assistance requirements and schedule for all equipment, packages, etc
    Assisting the selection of commissioning discipline specialists
    Consultant to engineering during design phases to facilitate commissioning activities during construction
    Support to field engineering during construction phase
    Organization of work forces in various areas to maintain adequate manpower for the scheduled commissioning activities
    Monitoring subcontractors commissioning crew manpower requirement, efficiency and productivity

Job Requirements

    He/She must have the ability to communicate with project discipline engineers at all levels and give guidance on commissioning requirements as per the scopes of the project activities.
    Attention to detail & high standard of work ethic, he should ideally hold an engineering degree or at least an HND in some type of engineering topic. A candidate with a minimum of 10 years Knowledge is preferred

Deadline: 14th September, 2012

Click here to APPLY

Join our facebook community @ www.facebook.com/jobsolutionz

No comments:

Post a Comment